
WA_DEV_GL6100_PTS_001 Rev 004 November 30, 2010 62
GL61x0 Product Technical
Specification and User Guide
12.2. GL6100 Embedded SIM Power Consumption
Three DC inputs (Vin) were used to measure the consumption: VinMIN(4.75V), VinTYP(12V) and
VinMAX(32V). Both the average current and maximum current peaks were measured. For more
information on the consumption measurement procedure, refer to section 12.4 Consumption
Measurement Procedure.
Note that power consumption performance is software related. The results listed in the following sub-
sections were based on Firmware 7.44. Refer to section 10.3 Operating System Upgrade Procedure
for more information on upgrading the software.
12.2.1. Power Consumption without the Sierra Wireless
Software Suite
Note: TX = the current peak is the RF transmission burst (Tx burst)
RX = the current peak is the RF reception burst (Rx burst)
Table 46. Power Consumption without the Sierra Wireless Software Suite (Serial Port Auto Shutdown Mode
Enabled); Typical Values
Embedded SIM/
External SIM
Paging 9 (Rx burst
occurrence ~2s)
Paging 2 (Rx burst
occurrence ~0,5s)
Paging 9 (Rx burst
occurrence ~2s)
Paging 2 (Rx burst
occurrence ~0,5s)
Comentarios a estos manuales