Sierra Wireless UMTS Especificaciones descargar pdf (Pagina 37)

Modem Status, Customization, and Reset Commands

Rev. 8 May.12 Proprietary and Confidential 37

!BSMCCHECK

Supporting chipsets:

• All

Note: This command is not

password-protected.

Return modem hardware version

Return the modem’s hardware (board) version number based on the hardware resistor.

A similar command, ^HVER, returns the version number based on the FSN (see the

UMTS Modems Supported AT Command Reference, Document 2130617).

For MC879xV, use ^HVER.

Usage:

• Query: AT!BSMCCHECK?

Response:

<hwRev>

Purpose: Return the modem’s <HW ID value>.

Parameters:

<version> (Modem’s hardware version)

• Valid values:

• ”ENG1_1” – Modem uses an Eng 1.1 board

• “ENG2_0” – Modem uses an Eng 2.0 board

• “SPR1_D” – Modem uses an SPR 1D board

• “SPR1_V” – Modem uses an SPR 1V board

• “ENGXXX” – Modem uses a newer board that cannot be identified by the

current firmware version

• “PCB_ID_x”—MDM8200 devices only. (‘x’ is the hardware revision level)

Table 3-2: Modem status, customization, and reset commands (Continued)

Command Description

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 295 296

Sin comentarios

Sierra Wireless UMTS Especificaciones Pagina 37