Sierra Wireless AirLink MP Guía de usuario descargar pdf (Pagina 116)

ALEOS User Guide

110 20080616

device PPP IP The IP for the AirLink device when comming through RS232.

Host PPP IP The IP for the Host RS232 Interface.

Command Description

Passthrough Init

String

Any AT Command string to be passed to the OEM module before entering PASSTHRU

mode, e.g. AT&S1V1, etc.

• string=AT command(s)

Passthrough Init

Refresh (Minutes)

Number of minutes of inactivity in PASSTHRU mode to resend the *PTINIT string to the

hardware module.

• n=0 : Disabled

• n=1-255 minutes

device Reset Period

(Hours)

In PASSTHRU mode, device will be reset after this period if no data has been sent or

received. Value is in hours.

• n=0 : Disabled

• n=1-255 hours

Passthrough Echo PassThru Echo : Echo data to the host.

• n=0 : Data will be passed to the host.

• n=1 : PASSTHRU mode will echo all host received data and will not pass the data to

the device while the device is not asserting DCD.

Note: If the device is asserting DCD, data will be passed from the host to the device as it

normally is when *CSX1=0.

Disable AT Escape AT Escape Sequence detection.

• n=0 : Enable

• n=1 : Disable

Command Description

Variable Type The data-type of the RTU ID in a modbus-variant protocol. This parameter is used to define

the data-type of the RTU ID in Modbus-like protocol data packets. This parameter is used

when the Mode Default (MD) is set to 63.

Variable Offset Indicates the offset in the data of where the Modbus ID starts.

Variable Length Length of the RTU ID in a modbus-variant protocol, in bytes. This parameter is used to

define the length of the RTU ID in Modbus-like protocol data packets. This parameter is

used when the when the Mode Default (MD) is set to hex 63

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 236 237

Sin comentarios

Sierra Wireless AirLink MP Guía de usuario Pagina 116