
ALEOS User Guide
114 20080616
Figure 11-3: ACEmanager: Serial - Port Configuration
3. Configure the serial port. To communicate with Garmin, set it to 9600, 8n1
with No Flow Control and DTR Mode = 0
Figure 11-4: ACEmanager: Serial - Port Configuration parameters
4. Configure the Garmin Parameters. Under the Applications tab, set the
Garmin Device Attached to 1 to enable talking to the Garmin.
Figure 11-5: ACEmanager: Applications
After all the parameters have been set, reboot AirLink device and apply the
changes.
• The “Garmin Device Attached” has the following states:
· Enable
· Disable
The Garmin Status field will display if the Garmin application is “Enabled” or “Not
Enabled”.
Comentarios a estos manuales