Sierra Wireless AirLink MP Guía de usuario descargar pdf (Pagina 229)

Rev 2.0 C Aug.10 223

*PPTAIPID Sets/queries the TAIP ID. This ID is returned in TAIP reports if it has been

negotiated with the TAIP client. This value is only used in conjunction with

TAIP emulation mode (*PPGPSR=F0).

• nnnn=TAIP ID (4 characters)

*PPFLUSHONEVT Flushes store and forward buffer when an input event (DTR/RTS) occurs.

• n=0 : Disable

• n=1 : Enable

*PPREPORTINPUTS Enable input reporting.

• n=0 : Disabled

• n=1 : Enabled

Note: If both AT*PPCOM1000=1 and AT*PPREPORTINPUTS=1 are

enabled, the AirLink Device digital inputs will be reported and the COM1000

inputs will be ignored.

*PPGPSDATUM Specifies the GPS datum to use for position reports. For accurate results, this

value should match the datum used by receiving mapping application.

• n=0 : WGS84

• n=92 : NAD27

• n=115 : NAD83

*PPTCPPOLL Specifies the port to listen on for TCP GPS report polling. The request to this

port needs to come from the same IP address in *PPIP.

• n=0 : Disabled

• n=1-65535 (default 9494)

*UDPRGPS Set or query GPS stamping of UDP Reliable packets. When set, data

received on the host serial port will be encapsulated with the GPS date and

time.

• n=0 : Disabled (default)

• n=1 : Enabled

*PPIGNOREIP When enabled, ignore ATS Server IP (*PPIP) updates in RAP.

• n=0 : Use ATS Server IP updates.

• n=1 : Ignore ATS Server IP updates.

*PPCOM1000 Enables support for extra inputs from a COM1000.

• n=0 : Disable

• n=1 : Enable

Tip:

If both AT*PPCOM1000=1 and AT*PPREPORTINPUTS=1 are enabled,

the AirLink Device’s digital inputs will be reported and the COM1000 inputs

will be ignored.

Table 6-21: GPS: Misc

Command Description

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 235 236 237

Sin comentarios

Sierra Wireless AirLink MP Guía de usuario Pagina 229