Sierra Wireless AirLink MP Guía de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 237
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
ALEOS User Guide
24 20080616
Figure 3-1: ACEmanager: Status - Home
WAN/Cellular
WAN/cellular status indicates specific information about the cellular connection
including IP address and how much data has been used. Some of the
information on this page is repeated on the home page for quick reference.
Phone Number The phone number (programmed into the device) is part of carrier account.
IP Address The current IP address of the device reported by the internal module, generally obtained from
your carrier. This is the address you can contact the AirLink device from the Internet if you have
a mobile terminated or Internet accessible account.
Network State Not Connected or Connected. Current state of the cellular radio.
RSSI The current RSSI (Receive Signal Strength Indicator) of the AirLink device as a negative dBm
value. Signal strength of the cellular signal. The lower the number, the better the signal strength.
The exact numbers vary between cellular carriers. However, -40dBm to -70dBm usually means
the AirLink Device is in an excellent coverage area.
Network Operator Indicates the network the device is currently on.
Network Service
Type
The type of service being used by the device, for example EV-DO Rev A or HSPA.
ALEOS Software
Version
Software version of the ALEOS build currently installed in the device.
Channel The current active CDMA/GSM channel number.
WAN/Cellular
Bytes Sent
Number of bytes sent to the network since system startup.
WAN/Cellular
Bytes Rcvd
Number of bytes received from the network since system startup.
Device Name Name of the device.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 236 237

Comentarios a estos manuales

Sin comentarios