Sierra Wireless AirLink MP Guía de usuario descargar pdf (Pagina 182)

ALEOS User Guide

176 20080616

User Name and Password

The user name is 'user'. The user name cannot be changed. The AirLink device's

password is used as the SNMP password (default is '12345').

Tip:

The eight-character password requirement for SMNPv3 is not enforced by the

PinPoint X Agent to allow the default password to function. Your SNMP administrator or

MIS may require you to change to a more secure and/or longer password.

To change the password in the AirLink device, go to Admin and change your

ACEmanager password.

Figure 4-1: ACEmanager : Change Password menu option

For the password, you can use numbers, letters, and/or punctuation.

Caution:

The password is case sensitive. “drowssaP” is not the same as “drowssap”.

Trap Destination

*SNMPTRAPDEST needs to be set with the destination IP and port. If either are

set to zero or empty, SNMP traps are disabled.

Note: Traps are sent out according to the SNMP security level (i.e. if the security level is 2,

traps will be authenticated and encrypted). Currently, the only trap supported is LinkUp.

Community String

The community string can be configured using *SNMPCOMMUNITY. The default

is “public”.

SNMP MIB Definition Sample

AIRLINK-MIB DEFINITIONS ::= BEGIN

IMPORTS

ObjectName FROM SNMPv2-SMI

MODULE-COMPLIANCE FROM SNMPv2-CONF;

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 236 237

Sin comentarios

Sierra Wireless AirLink MP Guía de usuario Pagina 182