Sierra Wireless AirLink MP Guía de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 237
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
ALEOS User Guide
46 20080616
Figure 5-6: ACEmanager: WiFi - WPA/WPA 2 Enterprise
USB
The AirLink device is equipped with a USB port which increases the methods by
which you can send and receive data from a connected computer. The USB port
can be set to work as either a virtual Ethernet port or a virtual serial port. A driver
installation is required to use the USB port in either mode.
By default, the port is set to work as a virtual Ethernet port.
Note: It is recommended that you use a USB 2.0 cable with your AirLink device and
connect directly to your computer for best throughput.
To change the USB port to allow virtual serial port communication in
ACEmanager in the LAN > USB group, choose USB Serial as the USB Device
Mode. To disable the USB port, select Disabled from the same menu.
Command Description
WiFi Encryption TKIP or AES. Defines what encryption scheme to use under WPA. Options are Temporal
Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES).
Primary or Secondary
Radius Server IP
This is the IP address of your enterprise RADIUS server. These servers must be
accessible ALL the time or clients will not be able to connect via Wi-Fi. The secondary
server is optional and used when the primary server is not available.
Secondary Radius
Server Port
This is the port number of your enterprise RADIUS server. The secondary port is used
when the primary is unavailable. Only used when a Secondary Radius Server is specified.
Primary or Secondary
Radius Server Secret
This is the shared secret key used to secure communications with the RADIUS server.
Only used when a Secondary Radius Server is specified.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 236 237

Comentarios a estos manuales

Sin comentarios